Shop Gear

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

The Politex material is constructed of several overlapping layers with different physical and mechanical properties. This compacted PVC is then coupled to two fabrics (knitted fabric and felt) that is then film dyed for long-lasting color retention. Politex offers strong resistance to rips, lacerations, stretching and fading. Politex is made in strict compliance with European regulations and is considered a "green” product. The Millennium 4 Carbon Composite Sole is injected molded carbon fiber in a matrix of nylon that creates a significantly lighter and stiffer sole that is less susceptible to changes because of aging or prolonged usage. The Soft Instep 3 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - Replaceable heel pad. - Regular last, standard men's D width, precise fit.

The Politex material is constructed of several overlapping layers with different physical and mechanical properties. This compacted PVC is then coupled to two fabrics (knitted fabric and felt) that is then film dyed for long-lasting color retention. Politex offers strong resistance to rips, lacerations, stretching and fading. Politex is made in strict compliance with European regulations and is considered a "green” product. The Millennium 4 Carbon Composite Sole is injected molded carbon fiber in a matrix of nylon that creates a significantly lighter and stiffer sole that is less susceptible to changes because of aging or prolonged usage. The Soft Instep 3 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - Replaceable heel pad. - Mega last, men's EE-EEE width, precise fit.

The Politex material is constructed of several overlapping layers with different physical and mechanical properties. This compacted PVC is then coupled to two fabrics (knitted fabric and felt) that is then film dyed for long-lasting color retention. Politex offers strong resistance to rips, lacerations, stretching and fading. Politex is made in strict compliance with European regulations and is considered a "green” product. The Millennium 4 Carbon Composite Sole is injected molded carbon fiber in a matrix of nylon that creates a significantly lighter and stiffer sole that is less susceptible to changes because of aging or prolonged usage. The Soft Instep 3 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - Replaceable heel pad. - Regular last, standard women's B width, precise fit.

TL-EW300 Di2 Cable Tool

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

High-performance road cycling shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

High-performance road cycling shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

Quick Overview - 270 Degree High Visibility Design - Highly Adjustable Mounting System - 30 Lumens - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 30 Lumen Max Output - 4 LED Chip - Finned Lens Design Provides 270 Degree Visibility - Blue LED Charge Indicator - Daytime Flash Mode - Up To 34 Hours Runtime - Micro USB Rechargeable Specs: Solid Modes: - High – 15 Lumens / 2 hrs - Low – 6 Lumens / 6 hrs Flash Modes: - Daytime Flash – 30 Lumens / 34 hrs - High Flash – 15 Lumens / 19 hrs - Low Flash – 6 Lumens / 34 hrs - Weight: 26 Grams w/ Bracket Size: - Overall Height – 56.3mm (2.22?) - Main Cylindrical Body Width – 21.7mm (0.86?) - Widest Fin Width – 32.3mm (1.27?) - Charge Time: 2 hrs Using 500mA USB Wall Charger Product Package Contents: - (1) UTM-30 Cosmo 30 Lumen Tail Light - (1) Micro USB Charging Cable - (3 Sizes) Rubber Mounting Inserts - (3 Sizes) Rubber O-Ring Mounting Straps *Please note, flickering or pulsating observed in video is due to, “strobe effect,” a video capture phenomenon and is not representative of what is seen by the naked eye (steady shining light)*

The All New 2021 Serfas® E-Lume Series Headlight New for 2021 our E-Lume Series Headlights feature a redesigned extruded aluminum housing, new optical lens with excellent side visibility, and improved battery capacity and LED performance. We made not only increased performance a priority but also improved rider visibility, so we designed an all new optical lens and housing with front corner cutouts to allow drastically more light be visible when viewed from either side – and this all without any reduction in quality of forward illumination or beam pattern. Constructed of aluminum the E-Lume housing is strong and lightweight as well as an efficient thermal conductor which effectively reduces heat buildup thus helping maintain temperatures for optimal battery performance and consistent light output. Light output of the E-Lume 350 is sent through a single optical lens creating a powerful beam with strong front illumination and excellent side visibility. Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable Specs: Solid Mode: - High – 350 Lumen / 3 hrs - Medium – 150 Lumen / 7 hrs - Low – 75 Lumen / 15 hrs Flash Mode: - Daytime Flash – 350 Lumen / 75 hrs - Low Flash – 50 Lumen / 90 hrs Weight : 142g w/ Bracket Battery: 1-Cell Li-Ion 1600 mah Charge Time: 2.5 hrs To Full At 700mA Using USB Wall Charger Color: Black

Cell Phone Top Tube Bag - Replaceable Cover (Lt-Stm4Rt) - Large Secondary Pocket - Secure Three Strap Design - Touch Screen Capable Replacement Cover - Cell Phone Cover Will Fit Up To Iphone 6+™ - Size: 7” X 4” X 3.75” - 105 Cubic Inches

Quick Overview - 270 Degree High Visibility Design - Highly Adjustable Mounting System - 60 Lumens - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 60 Lumen Max Output - Micro LED Chip - Finned Lens Design Provides 270 Degree Visibility - Blue LED Charge Indicator - Daytime Flash Mode - Up To 22 Hours Runtime - Micro USB Rechargeable Specs: Solid Modes: - High – 30 Lumens / 1.5 hrs - Low – 6 Lumens / 5.5 hrs Flash Modes: - Daytime Flash – 60 Lumens / 22 hrs - High Flash – 30 Lumens / 14.5 hrs - Low Flash – 6 Lumens / 22 hrs - Weight: 26 Grams w/ Bracket Size: - Overall Height – 56.3mm (2.22?) - Main Cylindrical Body Width – 21.7mm (0.86?) - Widest Fin Width – 32.3mm (1.27?) - Charge Time: 2 hrs Using 500mA USB Wall Charger Product Package Contents: - (1) UTM-60 Cosmo 60 Lumen Tail Light - (1) Micro USB Charging Cable - (3 Sizes) Rubber Mounting Inserts - (3 Sizes) Rubber O-Ring Mounting Straps *Please note, flickering or pulsating observed in video is due to, “strobe effect,” a video capture phenomenon and is not representative of what is seen by the naked eye (steady shining light)*

Enhanced Side Visibility Design. 130 Lumens / 2 Solid & 3 Flash Modes. USB C Rechargeable. Unique Fin Lens Design Provides Enhanced Long Distance Visibility While Creating Generous Attention-Grabbing Side Illumination Features: - 130 Lumens (Daytime Flash) - Three Super Bright CREE LEDs - Finned Lens Design Provides 180 Degree Visibility - LED Charge Indicator - Auto Safe Mode* - Daytime Flash Mode - Up To 22 Hours Runtime - USB C Rechargeable - Aero Post Compatible Bracket Solid Modes: - High (50 Lumens): 1 hr 30 mins - Low (15 Lumens): 5 hrs 30 mins Flash Modes: - Daytime Flash (130 Lumens): 19 hrs - High Flash (75 Lumens): 10 hrs - Low Flash (20 Lumens): 22 hrs - *Auto Safe Mode Extends Runtime Additional 45 mins - Weight: 52 Grams w/ Bracket - Battery: 500 mAh Lithium Polymer

The All New 2021 Serfas® E-Lume Series Headlight New for 2021 our E-Lume Series Headlights feature a redesigned extruded aluminum housing, new optical lens with excellent side visibility, and improved battery capacity and LED performance. We made not only increased performance a priority but also improved rider visibility, so we designed an all new optical lens and housing with front corner cutouts to allow drastically more light be visible when viewed from either side – and this all without any reduction in quality of forward illumination or beam pattern. Constructed of aluminum the E-Lume housing is strong and lightweight as well as an efficient thermal conductor which effectively reduces heat buildup thus helping maintain temperatures for optimal battery performance and consistent light output. Light output of the E-Lume 600 is sent through a single optical lens creating a powerful beam with strong front illumination and excellent side visibility. Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable Specs: Solid Mode: - Overdrive – 600 Lumen / 2.5 hrs - High – 300 Lumen / 6 hrs - Medium – 150 Lumen / 12.5 hrs - Low – 75 Lumen / 22 hrs Flash Mode: - Daytime Flash – 600 Lumen / 75 hrs - Low Flash – 100 Lumen / 90 hrs Weight : 170g w/ Bracket Battery: 1-Cell Li-Ion 2600 mah Charge Time: 4 hrs To Full At 700mA Using USB Wall Charger Color: Black

Air Force Tier Three floor pump - Premium Rubber Overmolded Ergonomic Handle - Top Mounted 2.5" Analog Pressure Gauge (PSI/BAR) - Larger More Stable Pump Base - Simple Valve Head (Presta/Schrader) - Integrated Hose Keeper - All Metal Barrel and Pump Base - 28 1/2" Pump Height

Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence, and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately - Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

SRAM's Cable Cutter features sharp, spring-loaded diamond-shaped jaws and ergonomic handles to cleanly cut cables and housing every time. It also has jaws for crimping cable crimps and a hidden awl for opening housing ends after cutting, if needed. Plus, there's a safety to keep this fine tool closed when not in use.

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

- Easy to use tool for checking cassette wear

- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

RockShox Volume Reducer Kits

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings